Echo Corner
10" Fine Finish Sliding Compound/Radial Arm Saw Blade, Negative(-5°) 80T
Disclosure: We may earn a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Learn more
Highlights
- This type of hook angle provides an opportunity to better control your work, as the blade is much less likely to try and pull the wood through the saw or the saw blade through the wood (depending if you are talking about a table saw or a radial arm saw or sliding compound miter saw).
- The negative face of the tooth is much less likely to cause chipping in the surface of the wood as it’s oriented in a counter-rotation direction.
- 80-Tooth: 0.094“ thin Kerf, (-5°) Negative Hook Angle ATB Tooth, High tooth blades cuts with a clean, smooth, beautiful edge
- Fine finish, Fine Cut, Framing, Crosscut wood, plywood, MDF, plastic, veneer, lumber, laminate, etc...
- Non-Stick Coating: Reduces friction and gumming, anti-rust, anti-overheat, easy to clean & store. Laser Cut Stabilizer Vents: less noise, anti vibration, stabilize the blade and keeping it cool, reducing the blade warp
- 10 inch (254mm), 5/8" Arbor, 6,000 MAX.RPM, compatible with 10" sliding compound miter saw & radial arm saw
Why You'll Love It
- Negative hook angle prevents the blade from pulling aggressively into workpieces for controlled cuts
- Counter-rotation tooth orientation reduces surface chipping when cutting fine materials
- High 80-tooth count delivers clean and smooth edges across wood, laminate, and MDF
- Thin 0.094-inch kerf removes less material while making fine finish crosscuts
- Non-stick coating protects against gumming, friction, overheating, and rust
- Laser-cut stabilizer vents minimize vibration and noise while keeping the blade flat and cool
Pros
- +Negative hook angle improves cut control
- +High tooth count produces smooth edges
- +Non-stick coating resists gumming and rust
- +Vibration vents reduce noise and blade warping
- +Thin kerf design for clean cuts
Cons
- -Limited to saws with a 5/8-inch arbor
- -Capped at a maximum speed of 6,000 RPM
- -Not suited for machines requiring positive hook angles
Detailed Review
The Echo Corner 10-Inch 80T Fine Finish Blade is engineered for woodworkers who need clean crosscuts on sliding compound miter saws and radial arm saws. By pairing a high tooth count with a specialized tooth geometry, it addresses the common problem of rough tear-out on delicate surfaces.
The standout feature is its -5 degree negative hook angle paired with an Alternate Top Bevel (ATB) tooth grind. Because the tooth face points in a counter-rotation orientation, it is far less likely to climb or pull material through the cut. This geometry gives you greater handling control and reduces surface chipping when cutting through materials like plywood, MDF, laminate, veneer, and plastics.
For cut quality and tool upkeep, the blade features a 0.094-inch thin kerf and 80 teeth to produce smooth edges with minimal waste. It is covered in a non-stick coating that resists rust, reduces heat buildup, and stops gumming from pitch. Integrated laser-cut stabilizer vents further dampen vibration and noise while preventing heat warping during longer cutting sessions.
Before buying, verify that your machine matches the 10-inch diameter and 5/8-inch arbor specifications. The blade also carries a strict 6,000 MAX RPM operating ceiling, so it should only be installed on equipment that operates within that rotational limit.
Verdict: This blade is an excellent choice for trim carpenters, cabinetmakers, and DIYers using sliding miter or radial arm saws. Its negative rake and 80-tooth design make it well suited for anyone demanding clean, controlled cuts in fine woods, laminates, and composite boards.
Specifications
- Blade Diameter: 10 inches (254mm)
- Arbor Size: 5/8 inch
- Tooth Count: 80T
- Tooth Type: ATB (Alternate Top Bevel)
- Hook Angle: -5 degrees
- Kerf Width: 0.094 inches
- Maximum Speed: 6,000 RPM
- Coating: Non-stick
Who Should Buy It
A great fit if you:
- Use a 10-inch sliding compound miter saw or radial arm saw and want smoother feeding control
- Work regularly with delicate materials like veneer, laminate, plywood, and MDF that chip easily
- Need clean crosscuts for fine finish, framing, or trim projects
Consider something else if you:
- Own a saw that requires an arbor size other than 5/8 inch
- Operate equipment with a rotational speed higher than 6,000 RPM
FAQ
What materials can this blade cut?
It is rated for fine finish and crosscut work on wood, plywood, MDF, plastic, veneer, lumber, and laminate.
Why is a negative hook angle beneficial?
The -5 degree hook angle makes the blade less likely to pull the wood or blade aggressively during the cut, providing better control and reducing surface chipping.
What are the arbor size and maximum speed ratings?
The blade has a 5/8-inch arbor and can run at a maximum speed of 6,000 RPM.
What do the laser-cut stabilizer vents do?
They reduce noise and vibration while stabilizing the blade and keeping it cool to prevent warping.
Photos
Product Specs
| Specification | Details |
|---|---|
| Brand Name | Echo Corner |
| Unit Count | 1 Count |
| Number of Items | 1 |
| Included Components | 1x |
| Manufacturer | Echo Corner |
| Part Number | ECUSA2541680sliding |
| Best Sellers Rank | #154,852 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #8 in Miter Saw Blades |
| ASIN | B0FPLHPTQR |
| Customer Reviews | 4.6 4.6 out of 5 stars (9) 4.6 out of 5 stars |
| Item Dimensions L x W | 10"L x 10"W |
| Item Thickness | 2.4 millimeters |
| Item Weight | 500 g |
| Style Name | Sliding Compound |
| Material Type | Carbide |
| Number of Teeth | 80 |
| Compatible Devices | 10" Sliding Compound Miter Saw, Radial Arm Saw |
| Compatible Material | Wood |
| Material | Carbide |
| Brand | Echo Corner |
| Product Dimensions | 10"L x 10"W |
| Style | Sliding Compound |
| Item Highlight | 5/8" Arbor, Non-Stick Coating, Fine Finish Crosscut Framing Lumber Plastic Plywood Laminate |
