13.5FT Semi Truck Air Lines Kit 3-in-1 Air Hoses for Truck Trailer

The XaXmTee 13.5FT Semi Truck Air Lines Kit combines air brake lines and electrical wiring into a single 3-in-1 assembly. It is designed for commercial truck and trailer operators who need a complete hookup system with built-in suspension hardware. By bundling the hoses, electrical cord, glad hands, and mounting gear into one package, it simplifies replacing worn or tangled connections between a tractor and trailer.

Durability is a major focus of the hose construction. The air lines feature a 3-layer integrated molding process with a double-braided spiral design, providing resistance to twisting and handling high burst pressure. Both ends of the air lines and the 7-way ABS electrical cable are protected by stainless steel springs. These spring joints add elasticity and cushioning, preventing sharp bends and wear at the connection points during daily operation.

The electrical line uses an industry-standard zinc die-cast plug meeting SAE J560 standards to deliver reliable power transmission from the engine. For routing and support, the package includes both a 16-inch single tender spring kit and a 16-inch double tender spring kit made with galvanized carbon steel springs, 304 stainless steel clamps, and rubber dampeners. An included mounting bracket securely holds the gladhands when lines are disconnected.

Before purchasing, keep in mind that this kit is fixed at 13.5 feet, which may not fit setups requiring longer or shorter runs. The components are direct replacements for specific commercial part numbers, so you must ensure your tractor and trailer use compatible 7-way electrical and standard gladhand connections.

Verdict: The XaXmTee 3-in-1 Air Lines Kit is a dependable, fully certified replacement bundle for semi truck drivers needing a complete connection setup. It is best suited for operators who want high-durability braided lines and full suspension hardware ready to install right out of the box.

• Length: 13.5 feet
• Air Hose Inner Diameter: 3/8 inch ID (DOT SAE J1402A)
• ABS Cable Rating: SAE J2394 (-65°C / -85°F)
• Electrical Plug: Zinc die-cast 7-way (SAE J560)
• Tender Spring Length: 16 inches (1 single, 1 double)
• Spring Materials: Galvanized carbon steel springs, 304 stainless steel and rubber clamps
• Included Hardware: 1 pair glad hands, 1 pair gladhand handles, 1 gladhand holder, 4 seals, Teflon tape

A great fit if you:

• Need a complete 13.5-foot 3-in-1 hose and cable assembly for a semi truck or trailer.
• Want all installation hardware included, such as tender springs, glad hands, handles, and seals.
• Operate in freezing environments requiring ABS cables certified down to -85°F.
• Are replacing Philips, Tectran, Tremec Sloan, or Peterbilt commercial line assemblies.

Consider something else if you:

• Require a custom or longer line length than 13.5 feet.
• Do not need replacement tender springs, glad hands, or bracket holders.

What parts come included in the box?
The kit includes one 13.5-foot 3-in-1 hose assembly, one 16-inch double tender spring kit, one 16-inch single tender spring kit, a pair of glad hands, a pair of handles, a gladhand holder bracket, four rubber seals, and Teflon tape.

What safety and industry standards does this kit meet?
It meets SAE J2394 for the ABS green cable (rated to -85°F), DOT SAE J1402A for the 3/8-inch ID air brake hoses, and SAE J560 for the 7-way zinc plug.

What brand part numbers does this kit replace?
It directly replaces parts from Philips (such as 30-2151 and 30-2171), Tectran (such as 169157 and PE13000), Tremec Sloan (451097, 455180DSET), Peterbilt (PE13000), and glad hands from Velvac and Bendix.