6 inch Hole Saw for Wood, Metal, Plastic & Drywall, with Arbor

The VIKITONHOLESAW 6-inch hole saw is built for DIYers and job site workers who need to cut wide, clean holes in common building materials. Equipped with a dedicated arbor, this large-diameter cutter provides a straightforward way to drill through drywall, wood, plastic, and thin metals without needing to buy separate mounting accessories.

Its cutting performance relies on a bi-metal structure that pairs high-speed steel teeth with a flexible steel body. This design maintains sharp edges while handling the stress of large-diameter boring. The lightweight body structure also minimizes the physical effort required during drilling, which aids in smoother operation and more efficient chip removal while working.

Assembly is quick and uses a secure pin-locking system. You simply rotate the arbor into the hole saw body until it is nearly closed, align the locking pins with the guide holes, and fasten the included screws. The package comes with an extra pilot drill bit and a hex key, ensuring you have the necessary replacement part ready if your primary pilot bit wears down.

There are clear material limitations to keep in mind before starting your project. This tool cannot cut stainless steel, nor is it meant for brittle surfaces like tile, glass, brick, concrete, porcelain, granite, or marble, which will quickly dull or damage the teeth. Drilling metal also requires a slower feed speed and liquid coolant, and the saw will become hot to the touch immediately after use.

Verdict: This 6-inch hole saw is a practical, complete kit for anyone needing to cut large openings for cornhole boards, drywall fixtures, or standard carpentry. It offers solid versatility across soft materials and thin metals as long as masonry and stainless steel are avoided.

A great fit if you:

• Need to cut 6-inch holes for cornhole boards or drywall projects
• Want an all-in-one set with the arbor, hex key, and an extra pilot bit included
• Work primarily with wood, plastics, drywall, or non-stainless thin sheet metal

Consider something else if you:

• Need to cut through stainless steel plates or heavy metal stock
• Work with masonry, brick, natural stone, ceramic tile, or glass

What is included in the box?
The package comes with one 6-inch hole saw, one arbor with an installed drill bit, one spare pilot drill bit, and one hex key.

Can this tool cut metal?
It can cut thin metals, but it is not suitable for stainless steel. When cutting allowable metals, use water or coolant and lower your drill feed speed.

What materials should not be cut with this hole saw?
Do not use it on brittle or masonry materials such as glass, ceramic, tile, porcelain, brick, granite, marble, natural stone, or masonry, as these will chip and quickly dull the teeth.

How do you assemble the arbor and saw?
Rotate the arbor into the hole saw until nearly closed without over-tightening, then line up the locking pins with the guide holes and secure them with the screws.