Braided Stainless Brake Hose (THIS IS NOT A VEHICLE SPECIFIC HOSE, please

TheStopShop Braided Stainless Flex Brake Hose Kit provides a universal pair of flexible lines designed to bridge custom braking setups. These hoses are commonly used in aftermarket disc conversions where factory-style lines may not route correctly or fit the updated calipers. Measuring 15 1/4 inches from end to end, they offer a practical length for custom plumbing projects.

Each hose is configured with specific ends to connect standard hard lines to modern calipers. One side features a 3/8-24 female inlet designed for an inverted flare, matching the most common 3/16 tube nuts. The opposite end is equipped with a 10mm banjo head that features a slight degree of bend to help align the connection at the wheel.

Because this is not a vehicle-specific item, buyers must carefully verify their line routing, overall length, and fitting sizes before installation. The package includes only the two 15.25-inch hoses, so you will need to source any additional fittings, banjo bolts, or crush washers separately if your setup requires them.

Verdict: This pair of hoses is a practical, direct solution for builders tackling disc brake conversions who need a 15.25-inch reach. If your project uses 3/16 hard lines and 10mm banjo calipers, this set delivers the right fittings without the guesswork.

• Brand: TheStopShop
• Material: Braided stainless steel
• Overall Length: 15 1/4 inches (15.25 inches)
• Inlet Fitting: 3/8-24 female (inverted flare for 3/16 tube nut)
• Caliper Fitting: 10mm banjo head with slight bend
• Package Quantity: 2 hoses

A great fit if you:

• Are building a custom disc brake conversion requiring flexible braided lines.
• Need a 15.25-inch line with a 3/8-24 female inverted flare inlet and a 10mm banjo end.
• Want a matched pair of flexible brake hoses for your vehicle project.

Consider something else if you:

• Require direct-fit replacement hoses made specifically for an original factory vehicle setup.
• Need different fitting sizes, straight banjo ends, or a length other than 15 1/4 inches.

Will these hoses fit my specific vehicle model?
These are universal, non-vehicle-specific hoses. You must check the 15.25-inch length and fitting specifications against your application to determine fitment.

What fittings are on the ends of these hoses?
One end features a 3/8-24 female inlet for inverted flare 3/16 tube nuts, while the other end has a 10mm banjo head with a slight bend.

What comes in the package?
The kit includes two 15 1/4-inch braided stainless brake hoses only.