EVIL ENERGY 6AN Fuel Line Kit CPE Nylon Braided AN6 Fuel Hose

The EVIL ENERGY 6AN Fuel Line Kit provides a dedicated fluid-routing solution for automotive and performance setups. Built to handle standard fuel systems as well as demanding fluid transfers, this hose is designed for users needing a reliable 10-foot run of AN6 line for plumbing engine bays and vehicle undercarriages.

Construction centers on a CPE rubber inner layer reinforced by 304 stainless steel wire and wrapped in an outer nylon braid. This layered design delivers a working pressure rating of 750 psi alongside a burst pressure ceiling of 2250 psi. The hose operates across temperatures ranging from -22°F to 248°F (-30°C to 120°C), making it suitable for both cold environments and hot engine compartments.

Fluid compatibility is broad. The line works with standard fuel, diesel, race gas, engine oil, transmission fluid, hydraulic fluid, and vacuum lines. Routing is guided by an inner diameter of 0.31 inches (8mm), an outer diameter of 0.56 inches (14.3mm), and a minimum bending radius of 63.5mm to prevent sharp kinking during installation.

Because this listing is limited to a 10-foot section with specific AN6 sizing, installations requiring longer continuous lines or different flow diameters will need separate parts. The listing also does not include end fittings or adapter hardware.

Verdict: The EVIL ENERGY 6AN Fuel Line Kit is a solid choice for mechanics and hobbyists seeking a high-pressure, multi-fluid hose for custom fuel or fluid plumbing. It offers dependable specifications for standard 6AN fluid transfer projects.

• Size: 6AN (AN6)
• Length: 10ft
• Inner Diameter (ID): 0.31 in (8mm)
• Outer Diameter (OD): 0.56 in (14.3mm)
• Materials: CPE rubber inner, 304 stainless steel wire, nylon outer braid
• Working Pressure: 750 psi
• Burst Pressure: 2250 psi
• Temperature Range: -22°F to 248°F (-30°C to 120°C)
• Minimum Bending Radius: 63.5mm
• Fluid Compatibility: Fuel, race gas, diesel, oil, transmission fluid, hydraulic fluid, vacuum

A great fit if you:

• Need a 10-foot AN6 line for plumbing fuel, oil, or transmission systems.
• Require a fluid hose rated for high pressures up to 750 psi.
• Work with diverse fluids like race gas, diesel, or hydraulic fluid.

Consider something else if you:

• Need a continuous hose run longer than 10 feet.
• Require different inner diameters outside the 0.31-inch (8mm) AN6 sizing.

What fluids can run through this hose?
It is compatible with standard fuel, race gas, diesel, engine oil, transmission fluid, hydraulic fluid, and vacuum applications.

What are the pressure and temperature limits?
The hose handles a working pressure of 750 psi with a 2250 psi burst pressure, and operates in temperatures from -22°F to 248°F (-30°C to 120°C).

What are the dimensions of this line?
It measures 10 feet in length, with an inner diameter of 0.31 inches (8mm) and an outer diameter of 0.56 inches (14.3mm).