Hole Saw Set, 22PCS Hole Saw Kit with 3/4" to 5" (19mm-127mm)

The LifeIdeas 22-Piece Hole Saw Kit offers a comprehensive range of cut sizes for DIYers and homeowners tackling utility cutouts in light construction materials. Equipped with 13 individual saw blades ranging from 3/4 inch (19mm) up to 5 inches (127mm), this set eliminates the need to buy individual cutters for varied tasks around the house or workshop.

Each blade is constructed from heat-treated carbon steel with anti-oil and anti-rust properties, designed with sharp serrations to deliver clean holes. The kit is intended for softer workpieces, including softwood, plastic plate, plasterboard, and thin PVC board, with a standard cutting depth of approximately 25 mm.

Setup is straightforward thanks to the included hardware. The kit comes with two mandrels, two drill bits, two twist drills, an installation plate, and a hex key, allowing you to swap out saw diameters quickly as your project demands. Everything fits into a customized portable case with designated slots to keep pieces from rattling around or getting lost.

Keep in mind that this carbon steel kit is explicitly not suitable for hard metals or other dense, hard materials. It is also limited to materials within its 25 mm cutting depth, so thicker lumber or solid heavy stock will require a different tool.

Verdict: The LifeIdeas 22-Piece Hole Saw Kit is a practical, all-in-one package for anyone needing to cut clean holes through drywall, PVC, plastic, or softwood without purchasing individual sizes separately.

• Piece Count: 22 pieces
• Material: Heat-treated carbon steel
• Blade Sizes: 3/4 in (19mm), 7/8 in (22mm), 1 in (25mm), 1-1/8 in (28mm), 1-1/4 in (32mm), 1-1/2 in (38mm), 1-3/4 in (44mm), 2 in (51mm), 2-1/2 in (64mm), 3 in (76mm), 3-1/2 in (89mm), 3.9 in (101mm), 5 in (127mm)
• Cutting Depth: Approximately 25 mm
• Included Accessories: 2 mandrels, 2 drill bits, 2 twist drills, 1 hex key, 1 installation plate, 1 storage box
• Compatible Materials: Softwood, plastic plate, plasterboard, thin PVC board

A great fit if you:

• Need a wide variety of hole saw diameters from 3/4 inch to 5 inches in one organized box.
• Frequently cut openings in drywall, plasterboard, thin PVC, or softwoods.
• Want an all-inclusive set that already includes the mandrels, drill bits, and hex wrench.

Consider something else if you:

• Need to cut through hard metals, steel, or dense, heavy materials.
• Require a cutting depth deeper than 25 mm.

What materials can this hole saw set cut?
It is designed for softwood, plastic plate, plasterboard, and thin PVC board. It is not suitable for hard metal or other hard materials.

What is the cutting depth of the blades?
The cutting depth is approximately 25 mm.

What accessories come included in the box?
The set includes 13 saw blades, 2 mandrels, 2 drill bits, 2 twist drills, 1 hex key, 1 installation plate, and a fitted storage case.