JET 5" x 6" Metal Cutting Horizontal/Vertical Band Saw, 1/2 HP, 115/230V

The JET 5-inch by 6-inch metal cutting band saw is designed for workshop metalworking, offering both horizontal and vertical cutting capabilities. It handles stock up to 5 by 6 inches, giving DIY fabricators and metalworkers a dedicated tool for cutting bar stock, tubing, and profiles without manual sawing.

Driving the tool is a 3-speed, 1/2 HP motor connected to a heat-treated, ground steel worm gear and bronze drive gear. This internal gearing powers through cuts steadily, while the fully adjustable ball bearing blade guides support the blade to ensure clean, precise tracking throughout the operation.

The unit sits on a heavy-duty 14-gauge steel stand equipped with a utility shelf for storing accessories. Moving the machine across a workshop floor is straightforward thanks to large-diameter wheels and an integrated handle, while adjustable leveling pads on the front legs help stabilize the base on uneven floors. For added safety, an automatic shut-off triggers as soon as a cut is completed.

As a 1/2 HP machine, it is tailored for general cutting tasks rather than continuous heavy industrial milling. Additionally, the manufacturer does not specify the exact blade length or width in the provided data, so you will need to check the manual for replacement blade sizing.

Verdict: This JET band saw is a dependable choice for hobbyists and small shop owners who need a mobile, accurate metal-cutting saw with a sturdy steel base. It offers great convenience with its auto shut-off feature and dual-voltage 115/230V setup.

• Cutting Capacity: 5 x 6 inches
• Motor Power: 1/2 HP, 3-speed
• Voltage: 115/230V
• Stand Material: 14-gauge steel with shelf
• Gear Type: Heat-treated ground steel worm gear with bronze drive gear
• Certification: CSA certified

A great fit if you:

• Need a dedicated saw for metal pieces up to 5 by 6 inches
• Want the flexibility of both horizontal and vertical cutting setups
• Need to move your saw around the shop on built-in wheels
• Require an automatic shut-off feature for safe hands-free finishing

Consider something else if you:

• Require more than 1/2 HP for thick, continuous industrial cutting
• Need stock capacities larger than 5 by 6 inches

What electrical standards does this saw meet?
The motor and electrical components are CSA certified, meeting strict guidelines and safety requirements.

What voltage does the motor run on?
The 1/2 HP motor is wired for 115/230V operation.

Does the saw shut off automatically when done?
Yes, it features an automatic shut-off mechanism that powers down the saw immediately after a cut is completed.