Makita 4101RH 5" Masonry Saw

This 5-inch masonry saw is built to handle tough stone, tile, and concrete cutting tasks. Powered by a 7.9 AMP motor, it provides the necessary force for demanding work while maintaining a compact form factor suited for precision job site cuts.

Wet cutting is essential for masonry, and this tool comes equipped for direct water management. It includes 15 feet of tubing, a dedicated water valve, and a pressure regulator to maintain steady flow. To safeguard the tool during wet operation, a specialized cover is engineered directly over the motor housing to keep water from entering the internal electronics.

For operator protection around wet environments, the power cord features an integrated ground fault circuit interrupter (GFCI) plug. In terms of cutting capacity, the saw reaches depths up to 1-5/8 inches at a standard 90-degree angle and up to 1 inch when tilted to a 45-degree bevel.

One clear limitation is the cutting depth, which maxes out at 1-5/8 inches, making it unsuitable for thick slabs or deep structural cuts. The listing also leaves out specifics regarding blade arbor size and overall tool weight, so you will need to verify blade compatibility separately.

Verdict: This saw is an ideal choice for tradespeople or DIYers who need a dedicated wet-cutting tool for masonry up to 1-5/8 inches thick. Its built-in water accessories and electrical safety features make it ready for demanding cutting tasks right out of the box.

• Motor: 7.9 AMP
• Cutting Capacity at 90°: Up to 1-5/8"
• Cutting Capacity at 45°: Up to 1"
• Tubing Length: 15 ft.
• Safety Feature: GFCI plug
• Included Accessories: Water pressure regulator and water valve

A great fit if you:

• Need to make wet cuts in tile or masonry up to 1-5/8 inches thick.
• Want an included water delivery setup with regulator and 15-foot hose.
• Require bevel cutting capabilities up to a 45-degree angle.

Consider something else if you:

• Need to cut materials thicker than 1-5/8 inches in a single pass.
• Prefer a dry-only cutting setup without water hookups.

What is the maximum cutting depth of this saw?
It cuts up to 1-5/8 inches deep at a 90-degree angle and up to 1 inch deep when set at 45 degrees.

What water accessories come with the tool?
The saw includes 15 feet of water tubing, a water pressure regulator, and a water valve.

Does this saw have built-in electrical safety for wet cutting?
Yes, it comes equipped with a ground fault circuit interrupter (GFCI) plug and a specialized cover to prevent water from entering the motor housing.