TICONN
TICONN 40PCS Hose Clamps Set 304 Stainless Steel, 1/4''–1-1/8'' Worm Gear
Disclosure: We may earn a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Learn more
Highlights
- 304 Stainless Steel: This hose clamp is stamped from 0.023" thick 304 stainless steel with smooth band edges that grip securely without damaging the hose surface; Resistant to rust, corrosion, and salt, it performs reliably in automotive engine bays, coastal marine environments, and harsh outdoor conditions year-round
- Worm Gear Locking: The slotted band and threaded screw mechanism allow you to dial in precise tension with a standard screwdriver, while the self-locking drive maintains a secure hold under vibration and pressure cycling; Once tightened on a fuel line or coolant hose, this small clamp remains secure through engine heat and road shock
- Exact Size Match: The 40 pcs hose clamps assortment contains 5 different sizes: 1/4''–7/16'', 3/8''–5/8'', 1/2''–3/4, 5/8''–1'' and 3/4''–1-1/8'' with 8 pcs for each size, the width of the pipe clamps are 5/16''; Please measure your pipe OD before ordering to ensure a proper fit, and check the engraved size on the band for fast identification
- Total Job Coverage: Tighten these clamps on automotive fuel lines and coolant hoses under the hood, secure garden hose connections at the spigot, or seal plumbing hose connections in a crawl space; The same corrosion-resistant band handles salt air on a marine vessel and grips HVAC condensate tubing in a utility closet
- Labeled 40-Piece Kit: The hose clamp assortment comes in a storage box for easy organization and portability in a toolbox, garage shelf, or job-site carry bag; Each clamp is engraved with its size range so you can grab the right hose clamp without measuring, saving setup time on every installation
Why You'll Love It
- Corrosion-resistant 304 stainless steel build stands up to automotive fluids, salt, and outdoor weather
- Five distinct size ranges cover pipe outside diameters from 1/4 inch to 1-1/8 inches
- Self-locking worm gear mechanism stays tight and resists loosening from vibration and engine heat
- Smooth band edges secure lines firmly without cutting into or damaging soft hose surfaces
- Engraved size markings and an included storage box keep your toolbox organized and ready
Pros
- +Durable 304 stainless steel construction
- +Engraved sizing on every clamp band
- +Comes in a dedicated organizer case
- +Smooth edges protect delicate hoses
Cons
- -Maximum clamping diameter is limited to 1-1/8 inches
- -Requires measuring pipe outer diameter before installation
Detailed Review
The TICONN 40-Piece Hose Clamps Set is an assortment of worm gear fasteners designed to secure fluid and air lines across home, automotive, and outdoor repairs. Built for DIYers and mechanics who deal with varied pipe sizes, this kit supplies five common diameters in an organized case to handle sudden leaks and maintenance projects without extra trips to the hardware store.
Each clamp is stamped from 0.023-inch thick 304 stainless steel, providing resistance to rust, corrosion, and salt exposure. This construction allows you to use them in tough environments such as engine bays, crawl spaces, and coastal marine vessels. The 5/16-inch wide bands feature smooth edges, which exert firm clamping force around fuel lines, coolant hoses, and garden spigots without gouging or tearing into soft hose material.
Tightening is handled by a slotted band and threaded screw drive that works with a standard screwdriver. The worm gear design incorporates a self-locking mechanism engineered to maintain tension through road vibration, engine heat, and pressure cycling. For fast selection during a job, each band has its size range permanently engraved, eliminating guesswork when matching lines.
Keep in mind that the largest clamp in this assortment maxes out at 1-1/8 inches, so it will not accommodate large radiator hoses or larger plumbing drains. Additionally, because proper sealing depends on pipe outside diameter rather than inner diameter, you will need to measure your lines before choosing a size.
Verdict: This 40-piece assortment is a dependable choice for anyone needing a corrosion-resistant fastener kit for automotive, plumbing, or HVAC lines under 1-1/8 inches. It provides a balanced variety of durable, size-stamped clamps in a tidy storage case.
Specifications
- Total Piece Count: 40 pieces (8 pieces per size)
- Material: 304 Stainless Steel
- Band Thickness: 0.023 inches
- Band Width: 5/16 inches
- Included Size Ranges: 1/4 to 7/16 inches, 3/8 to 5/8 inches, 1/2 to 3/4 inches, 5/8 to 1 inch, 3/4 to 1-1/8 inches
- Drive Mechanism: Worm gear slotted screw
- Included Storage: Labeled organizer box
Who Should Buy It
A great fit if you:
- Need a multi-size clamp assortment for automotive fuel lines or coolant hoses.
- Work on plumbing, garden spigots, or HVAC condensate lines measuring under 1-1/8 inches OD.
- Require rust-resistant fasteners for outdoor or coastal marine conditions.
- Prefer organized storage with clearly labeled size markings.
Consider something else if you:
- Need clamps for large-diameter pipes exceeding 1-1/8 inches.
- Require a quick-release or tool-free clamping style.
FAQ
What sizes are included in this assortment?
The set includes 8 pieces each of 5 size ranges: 1/4 to 7/16 inches, 3/8 to 5/8 inches, 1/2 to 3/4 inches, 5/8 to 1 inch, and 3/4 to 1-1/8 inches.
What tool do I need to tighten the clamps?
You can adjust and tighten the worm gear screw mechanism using a standard screwdriver.
Can these clamps be used in marine environments?
Yes, they are made from 304 stainless steel, which resists rust, corrosion, and salt in marine and outdoor conditions.
How do I know which size clamp to grab from the box?
Each individual clamp band has its size range engraved directly onto the metal, and the kit comes organized inside a labeled storage box.
Photos
Product Specs
| Specification | Details |
|---|---|
| Brand Name | TICONN |
| Model Number | TICONN - 282 |
| Number of Items | 40 |
| Set Name | 40 Pcs Kit |
| Unit Count | 40 Count |
| Manufacturer | TICONN |
| Manufacturer Part Number | TICONN - 282 |
| Best Sellers Rank | #1,563 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #5 in Hose Clamps |
| ASIN | B08HJK3G92 |
| Item Dimensions | 0.39 x 0.39 x 0.39 inches |
| Item Weight | 0.3 kg |
| Material Type | Stainless Steel |
| Tensile Strength | 1500 pounds |
| Color | Metallic |
| Style Name | 40 Pcs Kit |
| Material | Stainless Steel |
| Brand | TICONN |
| Item dimensions L x W x H | 0.39 x 0.39 x 0.39 inches |
| Style | 40 Pcs Kit |
| Item Highlight | Rust & Corrosion Resistance, Smooth Edges, Storage Case Included, Easy Size Identification, Automotive Home & Marine Use See more |
