TTFLEX 6 FT Washing Machine Drain Hose, Washer Drain Hose Extension Kit

The TTFLEX 6 FT Washing Machine Drain Hose Extension Kit provides a reliable way to route wastewater from a universal roller machine to a household drain. Whether replacing a worn discharge line or extending a setup that falls short of the standpipe, this flexible hose adapts to multiple outlet configurations.

Versatility is built directly into the connector end. The prepacked relief nozzle fits four common diameters: 0.8 inch, 0.9 inch, 1.2 inch, and 1.5 inch. You simply cut the connector to the size your machine requires. For extending an existing line, the kit includes a white 21 mm (0.8 inch) adapter suited for pipes with a 20 mm inner diameter, secured by 18-32 mm stainless steel clamps.

The hose is constructed from non-toxic EVA material engineered to withstand high water pressure and resist aging. At the discharge end, a clip-on U-bend hanger slides anywhere along the tube. This bracket anchors the line firmly in your standpipe or sink basin, aligning the flow to prevent slips, leaks, and splashing during the drain cycle.

Consider your layout measurements before setting up. At 6 feet in total length, this hose may still require additional extension pieces if your laundry machine sits far from the main plumbing outlet. You will also need your own cutting tool to size the multi-diameter nozzle appropriately.

Verdict: The TTFLEX 6 FT Drain Hose is a practical, adaptable pick for anyone needing a replacement line or extension for their washing machine. Its cut-to-fit nozzle and movable U-bend bracket deliver a secure, splash-free connection across most standard laundry setups.

• Length: 6 feet
• Hose Material: Non-toxic, anti-aging EVA
• Clamp Material: 304 stainless steel
• Clamp Size Range: 18-32 mm
• Main Connector Inner Diameter: 30 mm (1.2 inch)
• Trim-to-Fit Nozzle Sizes: 0.8 inch, 0.9 inch, 1.2 inch, 1.5 inch
• Adapter Diameter: 21 mm (0.8 inch) for 20 mm inner diameter pipes

A great fit if you:

• Need a replacement or extension drain hose for a universal roller washing machine.
• Have a washer outlet measuring 0.8, 0.9, 1.2, or 1.5 inches in diameter.
• Want a movable U-bend hook to prevent hose movement and drain splashing.
• Need a direct connection onto a 20 mm water pipe using the included adapter.

Consider something else if you:

• Require a single continuous hose longer than 6 feet without using an adapter.
• Prefer a fixed, single-size connector that does not require cutting.

What machine outlet sizes does this hose fit?
The multi-size connector end can be cut to fit four relief nozzle diameters: 0.8 inch, 0.9 inch, 1.2 inch, and 1.5 inch.

How do I use this as an extension hose?
Connect the included white 21 mm adapter to your existing drain pipe without removing the original setup, then secure the joint using the provided 18-32 mm clamps.

What materials are used in this kit?
The hose body is made from high pressure resistant, non-toxic EVA, while the included hose clamps are made from rust-resistant 304 stainless steel.

What is the purpose of the U-bend holder?
The movable clip-on bracket keeps the hose hooked securely inside your drain standpipe or sink, preventing the line from slipping out and stopping water from splashing.