Upgraded 50ft Airless Paint Hose for Graco Sprayers - 4300 PSI High

The Ccedviery 50ft Airless Paint Hose is an extended replacement line designed for users tackling large residential and commercial painting projects. It provides the reach needed to paint second stories and tall roof peaks without moving the main sprayer unit around constantly or suffering pressure drops.

Built to handle rigorous spraying conditions, this hose features a multi-layer build with dual-layer brass wire reinforcement running its entire length. This construction provides 360-degree protection against jobsite hazards, preventing kinks, surface abrasion, and accidental crushing. It also supports an operating pressure of up to 4300 PSI, giving you a dependable safety margin when working at high output.

Chemical compatibility is broad, allowing you to run standard architectural latex paints, water-based coatings, primers, stains, and solvent-based lacquers without causing the internal lining to swell or degrade. For hardware connections, the hose is equipped with standard 1/4-inch female swivel-nut fittings and integrated spring guards, ensuring direct compatibility with Graco Magnum, Ultra, TrueCoat, and RAC series sprayers.

Keep in mind that a full 50-foot hose may add extra bulk and weight if you only paint single small rooms or low fences. Additionally, you will need matching 1/4-inch connections on your gun or pump, as the listing does not include alternative adapters or couplers.

Verdict: This hose is a dependable upgrade for painters who need extra reach and heavy-duty pressure handling for whole-house or multi-story jobs. If you run a compatible Graco sprayer and need high burst resistance across varied coatings, it is well worth adding to your setup.

• Length: 50 feet
• Maximum Working Pressure: 4300 PSI
• Fittings: 1/4-inch female swivel-nut connections with spring guards
• Reinforcement: Dual-layer brass wire reinforcement
• Material Compatibility: Water-based architectural paints, solvent-based coatings, stains, lacquers, primers, latex
• Sprayer Compatibility: Graco Magnum, Ultra, TrueCoat, and RAC series

A great fit if you:

• Need to paint second stories, tall peaks, or large commercial areas without moving your sprayer.
• Spray high-pressure coatings requiring up to 4300 PSI operating limits.
• Use a compatible Graco Magnum, Ultra, TrueCoat, or RAC series paint sprayer.
• Apply a variety of finishes, including lacquers, latex paints, primers, and stains.

Consider something else if you:

• Work primarily in tight interior rooms where a 50-foot hose is too cumbersome.
• Own a sprayer setup that requires connection sizes other than 1/4-inch female swivel nuts.

What sprayers are compatible with this hose?
It is engineered for Graco Magnum, Ultra, TrueCoat, and RAC series sprayers using 1/4-inch female swivel-nut connections.

What types of paint can I spray through it?
The hose safely handles water-based architectural paints, latex, primers, stains, and solvent-based coatings like lacquers without swelling or degradation.

What is the maximum working pressure rating?
It features a working pressure rating of up to 4300 PSI with reinforced multi-layer construction.