2 Pack 426-02-063-0001 426-02-063-0002 Table Inserts Compatible with Delta

The BERPSE Bandsaw Table Inserts come in a convenient two-pack designed to replace worn or damaged parts on compatible workshop machinery. Sized at 2 and 1/2 inches in diameter and .100 inches thick, these inserts serve as direct replacements for original part numbers 426-02-063-0001 and 426-02-063-0002.

Compatibility spans a broad selection of machinery, including Delta 14-inch (LBS-56) saws and various specific Delta models like 28-245, 28-275, 28-280, and 28-345. They also suit select machinery from Rockwell, Jet, Ridgid, Grizzly, and other import saws that share the same recess dimensions. Getting two inserts in the package ensures you have an immediate spare ready when maintenance is due.

Proper installation requires checking your saw table first. The manufacturer notes that you must clear all debris from the hole edges before inserting the disc. If your workbench locating pins are missing or loose, the table blade slot can close slightly over time and reduce the opening size. In that situation, you will need to gently tap the blade slot open with a flathead screwdriver so the insert seats properly. Note that the listing does not state what material these inserts are made from.

Verdict: This two-pack is a practical choice for woodworkers restoring or maintaining compatible 14-inch Delta, Rockwell, or import band saws. Just measure your saw table recess beforehand to ensure the 2.5-inch diameter and .100-inch thickness match your setup.

• Quantity: 2 Pack
• Diameter: 2 & 1/2 inches
• Thickness: .100 inches
• Replaces Part Numbers: 426-02-063-0001, 426-02-063-0002

A great fit if you:

• Own a Delta 14-inch bandsaw or compatible Rockwell, Jet, Ridgid, or Grizzly model.
• Need a direct replacement for part numbers 426-02-063-0001 or 426-02-063-0002.
• Want a backup insert on hand alongside your primary replacement.

Consider something else if you:

• Have a saw table recess that differs from 2.5 inches wide and .100 inches thick.
• Need to know the specific material of the insert before purchasing.

What are the exact dimensions of these inserts?
Each insert measures 2 and 1/2 inches across and .100 inches thick.

What should I do if the insert fits too tightly in the table opening?
Clean any debris from the edges. If loose or missing locating pins have caused the table slot to close slightly, gently tap the blade mounting slot open with a flathead screwdriver to expand the hole to the proper size.

Which saw brands are compatible with these inserts?
They fit Delta 14-inch models as well as select band saws from Rockwell, Jet, Ridgid, Grizzly, and other import brands that use matching recess dimensions.