Bandsaw Table Insert(Diameter: 2.5 in,Thickness: 0.1 in) for Delta (2 Pcs)

The KLNBRWR Bandsaw Table Insert pack is designed to replace worn inserts on compatible workshop machinery, including 14-inch band saws and 24-inch spiral saws. Sitting around the blade, this insert protects the main saw table from excessive wear and fatigue. It suits woodworkers and hobbyists looking to maintain steady workpiece support and keep sawdust from clogging up the internal blade slot during regular operation.

Each insert measures 2.5 inches in diameter and 0.100 inches in thickness. When set level with or slightly below the surrounding table surface, it prevents workpieces from catching or hooking during passes. This flush design maintains cutting stability, which aids in producing uniform and accurate straight lines while working across the table.

Installation is straightforward: clean out any existing chips and debris from the slot before dropping the new piece into place. Compatibility spans a wide range of Delta models, as well as select 14-inch saws from Rockwell, Grizzly, Jet, Ridgid, and various imported brands. The set includes two matching inserts, providing an extra replacement whenever needed.

A key limitation is sizing variation among specific saw brands, as some throat openings on Delta, Rockwell, or Grizzly saws may be slightly narrower than 2.5 inches. Additionally, if your saw table positioning pin is loose or missing, the slot may close slightly over time, requiring you to pry it open gently with a flathead screwdriver before the insert will seat properly. The listing also does not state the specific construction material of the inserts.

Verdict: This two-pack is a sensible choice for woodworkers who need standard 2.5-inch table inserts for their 14-inch Delta or compatible band saws. As long as you measure your saw groove beforehand to confirm sizing, these inserts offer a simple way to keep your cutting area clean and supported.

• Diameter: 2.5 inches
• Thickness: 0.100 inches (0.1 in)
• Quantity: 2 pieces
• Tool Compatibility: 14-inch band saws and 24-inch spiral saws

A great fit if you:

• Own a compatible 14-inch Delta, Rockwell, Grizzly, Jet, or Ridgid band saw.
• Want a two-piece replacement set to keep a spare insert in the shop.
• Need to replace a worn insert to stop wood chips from falling into the blade slot.

Consider something else if you:

• Have a saw table with a groove diameter smaller or larger than 2.5 inches.
• Require inserts made from a specifically declared material like aluminum or phenolic.

What are the exact dimensions of each insert?
Each insert has a diameter of 2.5 inches and a thickness of 0.100 inches (0.1 in).

How should the insert be positioned during installation?
After cleaning sawdust from the slot, place the insert so that it sits level with or slightly lower than the table surface, which stops wood from catching during cuts.

What should I do if the insert does not fit into the table slot?
If a missing or loose table positioning pin has caused the slot to narrow, you can gently tap the slot with a flathead screwdriver to pry it open for a smooth fit.

How many inserts come in the package?
The package includes two band saw table inserts.