Festool 576821 Cordless table saw CSC SYS 50 EB-Basic

The Festool CSC SYS 50 EB-Basic is a cordless table saw designed for interior finishing and jobsite work that demands high accuracy. Built so compactly that it fits directly into a Systainer format, it solves the challenge of bringing true shop-level precision directly to the work area. It uses a dual 18V battery setup combined with a brushless EC-TEC motor, delivering the power and torque needed for rip cuts in solid wood without depending on a wall outlet.

Precision is managed through a digital display and adjustment dial. Instead of relying on manual sightlines, you enter blade height and bevel angles electronically down to a tenth of a millimeter (1/256 inch). The saw adjusts the blade automatically to match those inputs, ensuring complete repeat accuracy across multiple cuts. The digital screen also supports multiple languages to match your preference.

Material handling is supported by an integrated sliding table, rip fence, and miter gauge. The folding table allows for parallel cuts up to 11 inches (280 mm) while keeping transport size minimal. For angled joints and trim work, the miter gauge adjusts from -70 degrees to +70 degrees with built-in detents, the cross-cut capacity reaches up to 17-3/4 inches (450 mm), and the blade bevels from -10 degrees to 47 degrees.

The main trade-offs come from its compact footprint and specific design focus. The cutting height is limited to 1-7/8 inches (48 mm) for standard cuts and 1-3/8 inches (35 mm) when beveled down to -10 degrees, making it unsuitable for thick framing timbers. Additionally, the maximum parallel rip width of 11 inches means full sheet breakdown will require other tools.

Verdict: The CSC SYS 50 is an exceptional choice for trim carpenters and interior finish specialists who require precise, repeatable cuts in a highly portable format. If your workflow requires ripping wide sheet goods or cutting material thicker than 1-7/8 inches, a larger stationary saw will be a better fit.

• Power Source: 2x18 V dual-battery system
• Motor: Brushless EC-TEC motor
• Cutting Height: 1-7/8 inches (48 mm)
• Cutting Height at -10° Bevel: Up to 1-3/8 inches (35 mm)
• Parallel Cut Capacity: Up to 11 inches (280 mm)
• Cross-Cut Capacity: Up to 17-3/4 inches (450 mm)
• Bevel Angle Range: -10° to 47°
• Miter Angle Range: -70° to +70°
• Adjustment Accuracy: 0.1 mm (1/256 inch)
• Enclosure Type: Systainer format

A great fit if you:

• Work on interior finishing and require up to 1-7/8 inch cutting capacity.
• Need exact, repeatable cuts adjusted down to 0.1 mm via digital controls.
• Want a cordless, Systainer-sized table saw for easy transport between jobsites.
• Cut complex trim angles requiring miter settings between -70 and +70 degrees.

Consider something else if you:

• Need to rip boards wider than 11 inches on a table saw.
• Regularly cut stock thicker than 1-7/8 inches.

What is the maximum cutting height of this saw?
The saw provides a cutting height of 1-7/8 inches (48 mm) for standard cuts, and up to 1-3/8 inches (35 mm) for bevel cuts down to -10 degrees.

How does the blade adjustment work?
You enter your desired height and angle using the digital display and control dial. The saw automatically moves the blade to that exact setting within 0.1 mm (1/256 inch).

What power system does the saw use?
It runs on a 2x18 V dual-battery system paired with a brushless EC-TEC motor, matching the power of corded machines for rip cuts in solid wood.

What are the cutting width limits?
It supports parallel rip cuts up to 11 inches (280 mm) on its folding table and cross-cuts up to 17-3/4 inches (450 mm).