Fuji Spray 2202 Semi-PRO 2 - HVLP Spray System

The Fuji Spray Semi-PRO 2 is an HVLP (high-volume, low-pressure) turbine spray system aimed at serious hobbyists and semi-professional finishers who want more control than a basic airless sprayer offers. If you regularly tackle furniture refinishing, cabinetry, trim work or similar detail-oriented projects, this kind of system is designed to give you a finer, more consistent finish than a roller or brush can produce.

The centerpiece of the kit is a non-bleed spray gun with adjustable pattern fan control. Non-bleed means the air flow stops when you release the trigger, which cuts down on wasted material and keeps your work area cleaner. The fan control lets you widen or narrow the spray pattern to match what you are coating, whether that is a narrow cabinet door edge or a broad flat panel. The installed 1.3mm air cap set governs how the material atomizes, and it is a common starting size for a wide range of coatings.

The 25-foot hose is a practical detail that matters more than it might seem. It lets you park the turbine unit well away from your spray zone, reducing the chance of vibration or accidental bumps while you work. The hose also includes an air control valve, which gives you a second point of adjustment to reduce overspray and the bounce-back you can get when spraying into corners or recessed areas. The one-quart bottom feed cup is a standard capacity for this class of sprayer, and the metal turbine case doubles as a carrying case with a built-in holder for the gun.

A few trade-offs are worth noting. The one-quart cup is workable for most finish coats, but on larger surfaces you will stop to refill more often than you might like. The listing does not specify the turbine stage count or motor wattage, so if you are trying to match this system to a specific coating viscosity, you may need to check with the manufacturer directly. Like any spray system, this one requires proper cleaning after each use to keep the gun and air cap performing well.

Verdict: The Semi-PRO 2 is a well-specified HVLP kit for finishers who have outgrown rattle cans or basic sprayers and want repeatable, adjustable results. It suits woodworkers, furniture restorers and detail-focused DIYers who spray regularly enough to justify the setup and cleanup time involved.

• Air cap size: 1.3mm (installed)
• Cup capacity: 1 quart, bottom feed
• Hose length: 25 feet
• Turbine case material: Metal
• Spray gun type: Non-bleed, with adjustable pattern fan control
• Hose feature: Air control valve included

A great fit if you:

• Regularly spray furniture, cabinets, trim or similar wood finishing projects
• Want precise fan pattern control to handle both narrow edges and broad flat surfaces
• Need a system where the turbine can sit away from your work area while you spray
• Prefer a non-bleed gun that stops airflow when you release the trigger to reduce waste

Consider something else if you:

• Only spray occasionally and want something with minimal setup and cleanup
• Need to coat very large surfaces in one pass without stopping to refill a small cup

What size air cap comes installed on the gun?
The system ships with a 1.3mm air cap set already installed on the spray gun.

How long is the hose, and does it have any controls on it?
The hose is 25 feet long and includes an air control valve, which lets you adjust airflow at the hose to reduce overspray and bounce-back without going back to the turbine unit.

What cup size does the sprayer use?
It uses a one-quart bottom feed cup. That is a standard capacity for this class of system, though larger projects may require refilling mid-session.

Is there a place to rest the gun when the turbine is running?
Yes, the metal turbine case includes a built-in gun holder so you have a safe spot to set the gun down between passes.