SKIL 10" Dual Bevel Sliding Compound Miter Saw-MS6305-00

The SKIL MS6305-00 is a 10-inch dual bevel sliding compound miter saw engineered for accurate angled crosscuts across wide boards. Driven by a 15 amp motor producing 4,800 RPM, it gives woodworkers and DIY builders the cutting speed needed for smooth, detailed cuts in various lumber sizes.

Its sliding design allows cross cutting boards up to 2x12 at 90 degrees and 2x8 dimensional lumber at 45 degrees. For angled joins, the saw miters up to 50 degrees left and right, supported by 11 positive stops at the most common working angles. An integrated LED shadow line projects a precise cut line directly onto your workpiece.

The dual bevel functionality lets you tilt the blade left and right without flipping your material. It features four positive stop positions at 48 degrees left, 45 degrees left, 0 degrees, and 45 degrees right, simplifying compound angled cuts on trim and framing pieces.

As for limitations, the product data does not provide details on dust collection, included accessories, or the specific blade tooth count. Buyers needing to make cuts beyond 2x12 dimensions or past 50-degree miter angles will also require a different setup.

Verdict: The SKIL MS6305-00 is a solid choice for home workshops and framing projects needing versatile dual-bevel tilting and wide sliding capacity. It provides reliable alignment and plenty of power for everyday angled woodworking.

• Motor: 15 Amp
• Speed: 4,800 RPM
• Blade Diameter: 10 inches
• Cutting Capacity (90°): Up to 2x12 lumber
• Cutting Capacity (45°): Up to 2x8 lumber
• Bevel Stops: 48° left, 45° left, 0°, 45° right
• Miter Range: Up to 50° left and right (11 positive stops)
• Cut Alignment: LED shadow line

A great fit if you:

• Need to cut wide boards up to 2x12 dimensions.
• Want dual bevel tilting to make compound cuts without flipping lumber.
• Rely on an LED shadow line for fast visual cut alignment.
• Frequently cut trim at standard preset miter angles.

Consider something else if you:

• Regularly cut stock wider than 2x12 boards.
• Require miter angles greater than 50 degrees.

What is the cutting capacity of this saw?
It can cross cut lumber up to 2x12 at 90 degrees and up to 2x8 lumber when set to a 45-degree angle.

What bevel angles does the saw support?
The dual bevel system has four positive stop positions at 48 degrees left, 45 degrees left, 0 degrees, and 45 degrees right.

How does the cut alignment system work?
The saw uses an LED shadow line to cast a visual guideline directly on your material for accurate cuts.