Takywep 7 inch Wet Tile Saw, 3450 RPM, Bevel cuts tile from

The Takywep 7-inch wet tile saw is designed for DIY remodelers and contractors who need clean, angled cuts across various hard materials without creating excessive dust. Built around a dual-speed motor and a diamond blade, this tabletop saw manages ceramic, porcelain, and marble with reduced chipping. It offers a compact footprint that easily fits into small workshops or job-site setups.

A dual-speed motor operating at 3450 and 6500 RPM gives you the ability to match your cutting pace to the density of your tile. To assist with custom layouts, the adjustable bevel system tilts from 0 to 45 degrees, offering a cutting capacity of 1.34 inches at 90 degrees and 0.66 inches at 45 degrees. The 13 by 14 inch sliding worktable is constructed from rust-resistant galvanized steel and rests on anti-vibration rubber feet to keep your material steady during each pass.

Wet cutting is managed by an integrated water reservoir that circulates water directly to the diamond blade. This cooling action prevents glaze fractures, extends blade life, and traps airborne dust right at the cutting line. For workplace safety, the unit includes a manual reset overload protector that keeps the motor from suddenly turning back on following an unexpected power disruption.

While the machine handles standard tile tasks, the compact 13 by 14 inch worktable may feel constrained when working with extra-large format slabs. In addition, the maximum cutting depth drops to 0.66 inches when making 45-degree bevels, which limits its use on thicker stone materials.

Verdict: The Takywep 7-inch wet tile saw is a capable and portable tool for homeowners and tradespeople tackling backsplashes, floor tiles, and custom miter cuts. It is an excellent choice if you need clean, dust-controlled cuts in a portable format.

• Blade Size: 7 inches
• Blade Type: Diamond blade
• Motor Speeds: 3450 / 6500 RPM
• Bevel Angle Range: 0 to 45 degrees
• Cutting Depth at 90°: 1.34 inches
• Cutting Depth at 45°: 0.66 inches
• Table Dimensions: 13 x 14 inches
• Table Material: Galvanized steel

A great fit if you:

• Need to cut ceramic, porcelain, or marble tiles for backsplashes and floors.
• Want a built-in water tray to suppress dust and keep cuts smooth.
• Require adjustable bevel cuts from 0 to 45 degrees on materials under 1.34 inches thick.
• Prefer a compact, portable saw with safety overload protection.

Consider something else if you:

• Regularly cut materials thicker than 0.66 inches at a 45-degree bevel.
• Need an oversized work surface for massive commercial tiles.

What materials can this tile saw cut?
It is equipped with a diamond blade and a dual-speed motor designed to cut ceramic, porcelain, and marble tiles.

What are the maximum cutting depths?
The saw cuts materials up to 1.34 inches thick at a 90-degree straight cut and up to 0.66 inches thick at a 45-degree bevel angle.

How does the water reservoir work?
The built-in water tray continuously circulates water directly to the diamond blade to cool the cut, reduce airborne dust, and prevent glaze fractures.

What safety features are included?
The saw features a manual reset overload protector that stops accidental restarts after sudden power interruptions, alongside anti-vibration rubber feet for stability.