WEN Cordless 6.5-Inch Track Saw, Brushless with Variable Speed, Two 20V Max 4.0 Ah Batteries, and Charger (20691)

Cordless track saw setups offer mobile precision for ripping sheet goods and trimming thick stock without wrestling large boards onto a stationary setup. The WEN 20691 brings that mobility to woodworkers and remodelers by combining a brushless motor with a dual-battery power platform. Running on two 20V Max batteries at once, it delivers cord-free cutting while maintaining variable speed control between 2000 and 5500 RPM to adapt to different materials.

Capacity is a central strength of this configuration. The saw handles straight 90-degree cuts in boards up to 2.25 inches thick, making it capable of handling standard construction lumber and thick hardwood slabs. When angled work is required, it produces 45-degree bevel cuts up to 1.65 inches deep. A track-alignment cam helps maintain a snug interface with compatible guide rails, and the included 6.5-inch 48-tooth carbide-tipped blade mounts to a standard 20 mm arbor for clean, splinter-resistant cuts.

Power management is engineered around convenience and consistency. The kit includes two 4.0 amp-hour lithium-ion batteries, each equipped with an onboard LED charge gauge so you can check your remaining runtime at a glance. According to the manufacturer, these packs deliver consistent output across their charge cycle, preventing power drop-off during demanding rips. Furthermore, these batteries share cross-compatibility across the entire WEN 20V Max cordless power tool lineup.

The trade-offs reflect its system design and out-of-the-box inclusions. Because it relies on dual 20V battery ports, keeping both packs charged is necessary to run the tool. Additionally, while the saw includes a track-alignment cam, dust adapter, blade, charger, and power packs, the actual guide tracks (such as the CT9502 or CT9110) and hold-down clamps must be acquired separately before you can make guided track cuts.

Verdict: The WEN 20691 cordless track saw is an excellent pick for DIY builders and finish carpenters seeking cord-free precision for cutting sheet goods and thick planks. Those who already own or plan to buy the matching WEN guide tracks will get a capable, variable-speed cutting system complete with batteries and a charger.

• Blade Size: 6.5 inches (165 mm)
• Blade Tooth Count: 48-tooth carbide-tipped
• Arbor Size: 20 mm
• Maximum Cut Depth (90°): 2.25 inches
• Maximum Cut Depth (45°): 1.65 inches
• No-Load Speed: 2000 to 5500 RPM (variable)
• Motor Type: Brushless
• Power Source: Dual 20V Max battery ports
• Included Batteries: Two 20V Max 4.0 Ah lithium-ion
• Track Compatibility: WEN CT9502 and CT9110
• Clamp Compatibility: WEN CT992F
• Warranty: Two-year warranty

A great fit if you:

• Need to rip large sheet goods or boards up to 2.25 inches thick without setting up a heavy stationary table saw.
• Already invest in or plan to expand into the WEN 20V Max cordless tool ecosystem to share the included 4.0Ah battery packs.
• Require variable cutting speeds between 2000 and 5500 RPM to tailor your cut quality across different board densities and project types.
• Prefer a complete starter bundle that includes two high-capacity batteries, a charger, and a 48-tooth carbide-tipped cutting blade.

Consider something else if you:

• Need an all-in-one package that includes guide tracks in the primary box without purchasing rails separately.
• Prefer an AC corded plunge saw to eliminate the need for recharging dual lithium-ion battery packs on all-day builds.

Confirm on the listing:

• Check whether you need to purchase the compatible WEN CT9502 or CT9110 track rails and CT992F clamps separately for your intended cutting lengths.
• Check that your project stock falls within the 2.25-inch maximum straight cutting depth and 1.65-inch 45-degree bevel limit.
• Confirm the size of your shop vacuum hose against the included dust port adapter if you intend to connect active dust extraction.
• Verify that the package specifically includes the two 4.0Ah batteries, charger, blade, and dust adapter before completing your order.

How to compare your options: Focus on power delivery, maximum depth of cut, and speed control. This model utilizes a brushless motor with dual 20V battery ports and an adjustable 2000 to 5500 RPM dial, paired with a 2.25-inch cutting capacity. Balance whether you want a bare tool or an all-inclusive battery kit, and verify that the track system you plan to use matches the manufacturer recommendations.

Read through the included product manual to understand the variable speed settings, track alignment steps, and battery safety procedures before making your first cut.

Use the integrated track-alignment cam to remove any side-to-side play when resting the saw on your compatible guide track, ensuring straight and predictable travel along the cut line.

Monitor the onboard LED gauges on both 4.0Ah batteries before starting critical rips to ensure balanced power levels throughout long passes.

Hook up a dust collection system to the included dust port adapter to help clear wood chips away from the blade and track during high-speed cutting.

Does this track saw come with a cutting blade?
Yes, it comes with a 6.5-inch (165 mm) 48-tooth carbide-tipped blade featuring a 20 mm arbor.

Which guide tracks work with this model?
It is designed to be compatible with the WEN CT9502 and CT9110 tracks, along with WEN CT992F track saw clamps.

What is the maximum thickness of wood this saw can cut?
It can rip boards up to 2.25 inches thick at 90 degrees, or make 45-degree bevel cuts in boards up to 1.65 inches thick.

Are batteries and a charger included with the tool?
Yes, the package includes two 20V Max 4.0Ah lithium-ion batteries with onboard LED charge gauges and a compatible charger.

Can these batteries be used with other tools?
Yes, the included 4.0Ah batteries are compatible with the entire WEN 20V Max Cordless Power Tool series.