WOODSKIL 9-Inch Band Saw, 3-Amp Benchtop Bandsaw, 2500 FPM Blade Speed

The Woodskil 9-Inch Benchtop Band Saw provides a compact cutting station for woodworkers who need to make straight lines, curves, and beveled cuts without taking up floor space. Powered by a 3-amp, 1/2 HP motor running at 1720 RPM, it drives blades at 2500 FPM to produce clean cuts across different types of wood as well as soft metals.

The cutting setup centers on a 12-5/16-inch by 11-7/8-inch cast aluminum table. This surface tilts from 0 to 45 degrees and pairs with an included 120-degree miter gauge for angled work, while an included rip fence guides straight cuts. The machine accommodates blades measuring 59-1/2 inches in length and 1/8 to 3/8 inches in width, delivering a maximum cutting depth of 3-1/2 inches and a throat width capacity of 9 inches.

For workshop maintenance and stability, the unit is constructed on a sturdy steel base designed to prevent heavy vibration during operation. It also features a 2-1/2-inch dust exhaust port to connect to collection systems, along with an internal dust brush on the saw wheel to help keep internal tracking clean.

As a benchtop model, capacity is naturally limited to smaller stock. With a 3-1/2-inch maximum cut depth and a 9-inch width, it cannot handle large lumber or resawing thick boards. Metal cutting is also explicitly limited to soft metals, and users must consult the manual carefully before initial operation and setup.

Verdict: The Woodskil 9-Inch Band Saw is a practical benchtop option for hobbyists and DIY woodworkers tackling curved, angled, or straight cuts on smaller stock. It fits well in home workshops where space is limited and basic cutting versatility is needed.

• Motor Power: 1/2 HP, 3-Amp
• Motor Speed: 1720 RPM
• Blade Speed: 2500 FPM
• Cutting Capacity: 3-1/2 inches deep, 9 inches wide
• Blade Length: 59-1/2 inches
• Blade Width Range: 1/8 inch to 3/8 inch
• Table Size: 12-5/16 inches x 11-7/8 inches
• Table Tilt: 0° to 45°
• Table Material: Cast aluminum
• Base Material: Steel
• Dust Port Size: 2-1/2 inches

A great fit if you:

• Work with workpieces under 3-1/2 inches thick and 9 inches wide.
• Need to make curved, straight, or bevel cuts up to 45 degrees on wood and soft metal.
• Want a benchtop saw with built-in dust collection ports and a vibration-reducing steel base.

Consider something else if you:

• Need to cut hard metals or dense structural materials.
• Regularly resaw thick lumber that exceeds a 3-1/2-inch cutting height.

What materials can this band saw cut?
The saw is designed to cut different types of wood and soft metals.

What size blades does this band saw use?
It takes blades that are 59-1/2 inches long and between 1/8 inch and 3/8 inch wide.

What are the maximum cutting dimensions?
The saw offers a maximum cutting depth of 3-1/2 inches and a maximum cutting width of 9 inches.

Does the table adjust for angled cuts?
Yes, the cast aluminum table tilts from 0 to 45 degrees, and the tool includes a 120-degree miter gauge.