DEWALT 12-Inch Miter Saw, 15-Amp, Single Bevel, Compound (DWS715)

This 12-inch single bevel compound miter saw is built for carpenters, finish trimmers, and serious DIYers who need accurate, repeatable crosscuts and miter cuts on dimensional lumber. It runs on a 15-amp motor and swings a 12-inch blade, making it capable of handling the kinds of cuts that come up constantly on framing and trim jobs.

The stainless-steel miter detent plate with 14 positive stops is one of the most practical features here. Those preset stops let you snap to the most commonly used miter angles quickly, so you are not hunting for a setting mid-job. The machined base fence support and precise miter system work together to keep the workpiece firmly in place and the cut line accurate, which matters when you are fitting trim or cutting rafters to a specific angle.

The tall sliding fence is worth noting for anyone working with thicker stock. It supports material up to 5-1/2 inches vertically, which means you can stand taller boards on edge without the fence falling short. Crosscut capacity reaches 2x8 dimensional lumber at 90 degrees and 2x6 at 45 degrees, covering the range that comes up most often in residential framing and interior trim work.

The trade-offs are worth understanding before you buy. The bevel tilts up to 48 degrees to the left, which is generous, but only 3 degrees to the right. That means this is not a full dual-bevel saw. For compound cuts where you need a significant bevel in both directions, you would have to flip your workpiece. The listing also does not specify what accessories or blade come included, so factor that in when planning your purchase.

Verdict: This saw is a strong choice for woodworkers and contractors who regularly cut dimensional lumber and need dependable angle accuracy. If you primarily need left-bevel compound cuts and want a 12-inch blade with a solid detent system, it fits the bill well. Those who need full dual-bevel capability for complex crown molding or similar work should look for a saw that tilts significantly in both directions.

• Blade size: 12 inches
• Motor: 15 amps
• Miter detent stops: 14 positive stops on a stainless-steel plate
• Bevel range: 0 to 48 degrees left, 0 to 3 degrees right
• Tool height: 15 inches
• Max vertical fence support: 5-1/2 inches
• Crosscut capacity at 90 degrees: 2x8 dimensional lumber
• Crosscut capacity at 45 degrees: 2x6 dimensional lumber
• Detent plate material: Stainless steel

A great fit if you:

• Regularly cut 2x6 or 2x8 dimensional lumber for framing or finish carpentry
• Want quick, repeatable angle settings without dialing in each cut from scratch
• Work primarily with left-side bevel cuts and occasional right-side micro-adjustments
• Need a saw that can stand taller stock on edge thanks to a 5-1/2-inch fence height

Consider something else if you:

• Need significant bevel range in both directions for complex crown molding or dual-bevel compound cuts
• Are working with material that exceeds the listed crosscut capacities

What is the maximum bevel angle this saw can cut?
It bevels up to 48 degrees to the left and up to 3 degrees to the right. It is a single bevel design, so the right-side range is very limited.

What size lumber can it crosscut?
It handles 2x8 dimensional lumber at 90 degrees and 2x6 dimensional lumber at 45 degrees.

How tall a board can the fence support vertically?
The tall sliding fence supports boards up to 5-1/2 inches when stood on edge vertically.

How many preset miter angle stops does it have?
The stainless-steel miter detent plate includes 14 positive stops, covering the most commonly used miter angles.